GENERAL

 Remote Controller 

For your convenience, remote controller of Trident smart battery charger offers plenty of information and powerful function. It has user friendly setting and design:

. 55x18mm LCD displayer

.All parameter of charger is visible and settable through remote controller

.Battery condition is visible

. Output power can be limited to avoid main switch to be tripped in case of small shore power available only

 Together with the remote controller, 3 meters cable was supplied.

SPECIFICATIONS

 1.       LED indicator:

a)        Power: light on when the battery charger is power on and it is set to communicate to R/C by dip switch.

b)        Fault: error alarm and LCD display the fault content.

2.       Buttons:

a)        Set: Set the parameter

b)        Enter: Page Switch and switch on/off the background light.

c)         OutputPower: Setting the output power of the battery charger

d)        RST: Reset R/C to the original setting.

 

* How to change the output power:

1>Press Enter to switch the page until it shows “ OUTPUT POWER xxx%”

2> Press the “OutputPower” button for several seconds until the percentage on the screen is freshing.

3>Press the “Set” button to choose your setting for the output power. (5 options are available: 20%, 40%, 60%, 80% and 100%. The default setting is 100%) 

Installation Guide

 

1.       It is not a water proof type. Please locate a position of which water is not accessible.

2.       Please cutting the hole as per size offered by following Pic A

3.       Connect cable to remote controller and battery charger.

4.       Put the dip switch on correct position on the battery charger:

Switch 5	Switch 6	Switch 7	Switch 8
ON	ON	OFF	OFF

5. Please use screw (M4) to fix the remote controller onto dashboard, please refer to pic B.

POSTAGE INFORMATION

WARRANTY