GENERAL

55W  H3 6000K External HID Xenon Kit
Includes everything you need, you can convert pair of lightforce in about 15minutes with this kit
Suits Lightforce 140,170 and 240
Note: We spend more on our ballasts and globes to ensure 1% fail rate, no flicker, quick start up
 

installation is very easy. No drilling and No re-wiring.

Product features:

•  Over 4500 lumens!!
• HID is far superior to Halogen globes.
• HID has a very low amperage draw for their output, compared to Halogen globes.
• The HID do not have a fragile element that can be affected by corrugations ECT.
• Due to the lower watts and amps used, the HID runs cooler meaning they last longer and will not damage your lenses.
• Low amps requires no upgrade of Wiring, You can use the STD loom with the 55w kit.
• Our globes are all UV stable, so won’t cause imperfection of lenses.

1. Open your light force light remove old billet and globe
2. Install new billet with hid globe as per image
3. Remove clips from globe, push wires through the lightforce arm
4. Then reconnect the clips to the globe wires, then connect globes to extenders
5. Extenders connect to your ballast which you mount either under your bonnet or bullbar
6. then you are done

SPECIFICATIONS

Suits Lightforce 140,170 and 240

This kit is complete with everything, not like others, check what you get carefully, even includes new billet adapters, otherwise you will have to make your own with other kits sold by others

 

POSTAGE INFORMATION

WARRANTY